Electrical Safety Performance Tester – RK2518-8 Multiplex Resistance Tester – Meiruike

RK2518-8 Multiplex Resistance Tester

Product Introduction

RK2518-8 Multi-Channel Resistance Tester Adopts The Current Mainstream 32bits CPU And High-Density SMD Mounting Technology, 24 Bit Color Resolution 480*272 True Color IPS LCD LCD Display, And Up And Down Function Keys, The Interface Is Refreshing And Easy To Operate; It Is Used In Relay Contact Resistance, Connector Resistance, Wire Resistance, Printed Circuit Board Line And Solder Hole Resistance, Etc.; Temperature Compensation Can Avoid The Influence Of Environmental Temperature On The Test Work; Rk2518 Series Provides A Variety Of Interface Functions, Which Can Facilitate Data Communication And Remote Control With PC.

Application Field

It Is Widely Used To Measure The Resistance Of Various Coils, The Resistance Of Motor Transformer Windings, The Wire Resistance Of Various Cables, The Contact Resistance And Metal Riveting Resistance Of Switch Plugs, Sockets And Other Electrical Components, Metal Flaw Detection, Etc. It Can Use Handler, USB And RS232 Interfaces To Output Good / Bad Product Signals For Automatic Testing.

Performance Characteristics

1. The Maximum Resistance Accuracy: 0.05%; The Minimum Resistance Resolution: 10 Μ Ω;

2. Temperature Compensation Function (TC); Basic Temperature Accuracy: 0.1 ℃;

3. Maximum Test Range: 10 Μ Ω ~ 200K Ω;

4. Zero Base Design, Weak Resistance Test Without Clearing;

5. Single Channel Maximum Test Speed: 40 Times / S;

6. Third Gear Comparison Function: Pass / Over Upper Limit / Over Lower Limit;

7. Multiple Trigger Modes: Internal, External And Manual;

8. RS232C / Handler / USB / RS485 Interface Realizes Remote Control;

9. U Disk Can Record Test Data And Upgrade Instrument Software Remotely.