Products
-
RK9910A/ RK9910B/ RK9920A/ RK9920B Programmable Withstand Voltage Tester
RK9910A/RK9920A:
AC:0.05-5.00 DC:0.05-6.00KV
AC:0.001mA-10mA
DC:0.1uA-5mAAC:0.001mA-20mA
DC:0.1uA-10mA -
RK7112/ RK7122/ RK7110/ RK7120 Programmable Withstand Voltage Tester
RK7112:AC:0-5KV 0.10-12.00mARK7122:AC:0-5KV DC:0-6KV AC:0.10-12.00mA DC:0.10-5.00mARK7110:AC:0-5KV 0.10-12.00mARK7120:AC:0-5KV DC:0-6KV AC:0.10-12.00mA DC:0.10-5.00mA -
RK1316BL/ RK1316D/ RK1316E/ RK1316G/ Audio Signal Generator
20Hz-20kHz 0.1-15Vrms/0.1Vrms--18Vrms/0.1Vrms--22Vrms/0.1Vrms--28.5Vrms 20/40/60/100W
-
RK-8/ RK-16 Multi-Channel Temperature Tester
8/16-Channal ≤20W
-
RK9800N/ RK9901N Series Intelligent Electric Quantity Measuring Instrument
0~600V 0~4A 3.5~20A 12kW -
RF9800/ RF9901/ RF9802 Intelligent Power Meter
- RF9800/ RF9901/ RF9802
- 75V/150V/300V/600V 0.5A/2A/8A/20A 12kVA
- 150V/300V 0.5A/2A/8A/20A 6000VA
- 75V/150V/300V 0.5A/2A/8A 600VA
-
RK1940-2/ RK1940-3/ RK1940-4/ RK1940-5 High Voltage Digital Meter
AC/DC:1000V ~20/30/40/50kV 1000MΩ
-
RPS3003D-2/ RPS3005D-2/ RPS3003D-2/ RPS6002D-2/ RPS6003D-2/ RPS3003D-2/ RPS6005D-2/ RPS3010D-2/ RPS3020D-2/ RPS3030D-2 Adjustable DC Regulated Power Supply
Product Introduction RPS Series Adjustable DC Regulated Power Supply Is Designed For The Laboratory,School And The Production Line Specifically,The Output Voltage And Output Load Current Can Be Adjusted Between 0 And The Nominal Value Continuously.And With The Shutdown Of The External Circuit Protection Function And Comes With A Fixed Output For 3.3V/5.0V/1A.The Stability Of Output Voltage Power Supply And Ripple Coefficient Is Very Good And Have Perfect Protection Circuit. This Series Of Pow... -
RPS3003C-2/ RPS3005C-2/ RPS6002C-2/ RPS6003C-2/ RPS6005C-2/ RPS3003C-3/ RPS30005C-3/ RPS6003C-3 Adjustable DC Regulated Power Supply
Product Introduction RPS Series Adjustable DC Regulated Power Supply Is Designed For The Laboratory,School And The Production Line Specifically,The Output Voltage And Output Load Current Can Be Adjusted Between 0 And The Nominal Value Continuously.And With The Shutdown Of The External Circuit Protection Function And Comes With A Fixed Output For 3.3V/5.0V/1A.The Stability Of Output Voltage Power Supply And Ripple Coefficient Is Very Good And Have Perfect Protection Circuit. This Series Of Pow... -
RPS3003D-3/ RPS3005D-3 DC Power Supply
Output Voltage: 0 ~ 30VOutput Current: 0 ~ 3A/5A -
RK2514N/AN, RK2515N/AN, RK2516N/AN/BN DC Low Resistance Tester
RK2514N/AN、RK2515N/AN、RK2516N/AN DC Low Resistance Tester Adopts Single Front Mainstream 32bits CPU And High-Density SMD Mounting Technology, 24 Bit Color 4.3 Inch Color LCD Screen And Rotary Encoder, With Fresh Interface And Convenient Operation; It Is Used In Relay Contact Resistance, Connector Insertion Resistance, Wire Resistance, Printed Circuit Board Circuit And Solder Hole Resistance, Etc.; Temperature Compensation Can Avoid The Influence Of Environmental Temperature On Test Work; R... -
RK9713/ RK9713B Electronic Load
0~150V/ 0~500V0~120A/ 0~30A600W -
RK9714/ RK9714B Electronic Load
0~150V 0~240A 1200W
0~500V 0~60A 1200W
-
RK8511/ RK8512 Electronic Load
RK8511/ RK8512 0～150V 0～30A 0～150W
0～150V 0～60A 0～300W
-
RK200A Battery Internal Resistance Tester
Product Introduction RK-200A Battery Internal Resistance Tester Is Used To Measure The Internal Impedance Of Battery And The Degree Of Membrane Damage Of The Battery Acidification. Application Area It Is Applied For Cadmium Nickel Used In Mobile Phones,Nickel Metal Hydride Batteries,Lithium Batteries,Lead-Acid Batteries,The Research Institutes And Manufacturers Of The Maintenance Free Batteries Testing And Battery Research Testing. Performance Characteristics High Clear Digital Display,Intuit... -
MOS-620CH Analog Oscilloscope
DC-20MHz
-
-
-
-
RK101/ RK201/ RK301 Withstand Voltage point Tester
The purpose of the spot check instrument is to verify whether the instrument parameters meet the standards and whether the instrument alarm function is normal. Through a test qualified point and a test alarm point, adjust the output of the instrument to be inspected to this point for testing. If the result is normal, it means that the accuracy of the instrument is correct. If the test result is abnormal at the test point, it means that the instrument is out of tolerance and needs to be sent b...
