Professional China Audio Sweeping Frequency Signal Generator - RK1316BL/ RK1316D/ RK1316E/ RK1316G/ Audio Signal Generator – Meiruike

Product Introduction
RK1316 Series  Audio Signal Generator Adopts Advanced Voltage Controlled Oscillation Circuit To Produce Stable And Low Distortion Sine Wave Signal. Digital Display Of Output Amplitude And Frequency Is Adopted. The Frequency Sweep Range Can Be More Than 1:1000. The Starting Point And End Point Of Frequency Sweep Can Be Set Arbitrarily. It Has The Functions Of Power On Delay Output And Short Circuit Protection. At The Same Time, It Can Also Test The Positive And Negative Polarity Of Loudspeakers, Earphones And Moving Coil Receivers Of Any Type, Size And Impedance.
Application Area
The Instrument Can Not Only Produce Audio Signals For Audio Audiometry, But Also Accurately And Quickly Identify The Positive (Negative) Polarity Of The Loudspeaker And The Pure Tone Index Of The Loudspeaker. Simple Operation, Widely Used In Acoustics, Telecommunications And Other Aspects, Especially Suitable For Speaker Production And Speaker Manufacturers.
Performance Characteristics
1. Direct Digital Synthesis (DDS) Technology Was Used;
2. The Output Frequency Of The Waveform Is 20Hz ~ 20kHz, And The Sweep Frequency Ratio Is 1000;
3. The Frequency Resolution Is 1 Hz;
4. Frequency Stability ≤ 5 × (10 To The Negative 6th Power);
5. The Output Amplitude Of Small Signal Is 10mVrms;
6. The Starting Frequency And Ending Frequency Can Be Set Arbitrarily;
7.With Start-Up Delay Output, Short-Circuit Current Limiting Protection Function;
8. It Has All The Advantages Of RK1212N Series;
9. With Polarity Tester Function, No Need To Buy Separately;
10. It Has Its Own Speaker And Earphone, And Can Switch The Voltage Freely.